Setting the Alarm at Closing

 (8/22/2000)

NOTE: Security system will not arm when:

• Bill's door is open
• Donna's door is open
• Front door is open
• Someone is tripping the motion detector

Procedure

1. At start, key pad light is green and message on display panel says "System ready"
           (If not, check doors to make sure they are all closed)
2. Enter your security code
3. Press the ON/OFF button
4. Key pad light turns red (must leave library in 60 seconds)
5. Lock front door (top latch on exit door should already have been secured)